High Pressure Carbon Monoxide Reciprocating Compressor

November 2011 through November 2015

PDC is a manufacturer of a two stage high pressure reciprocating diaphragm compressor for carbon monoxide gas service. the diaphragm compresor shown above is a fully automated compression system with suction and discharge pulsatation dampners.

Oxygen Reciprocating Diaphragm Compressor

August 2011 through August 2015

PDC is a manufacturer of reciprocating diaphragm compressor for oxygen gas. The compressor shown in this picture is for oxygen gas service. It is oxygen cleaned with fire resistant oil. All process contacting parts are suitable for oxygen gas.

Reciprocating Diaphragm Compressor for Hydrogen Bromide (HBR)

August 2011 through August 2015

PDC is a manufacturer of reciprocating diaphragm compressors for hydrogen bromide, (HBR) service. The picture shown above is a duplex reciprocating diaphragm compressor for hydrogen bromide gas. Discharge pressures up to 200 psig. It is fully automated for a turnkey operation.

Reciprocating diaphragm Compressor for carbon monoxide gas

May 2011 through May 2014

As a mannufacturer of diaphragm compressors, shown in the photograph are two high pressure reciprocating diaphragm compressors for carbon monoxide gas mounted on one common frame. Instrumentation includes transmitters. Suction and discharge pulsation dampners, isolation valves, winterization package for cold climates. Built to comply with plant standards

Tetra-Fluoro ethylene (TFE) reciprocating Diaphragm Compressor

April 2011 through April 2015

Two-stage Tetra-Fluoro ethylene (TFE) gas diaphragm compressor system.

Sour Gas Reciprocating Diaphragm Compressor

April 2011 through April 2015

Sour gas high pressure reciprocating diaphragm gas compressor with close loop water cooling system, crank-case heater and heat traced piping for cold tempreature. Diaphragm Compressor is designed to plant specifications.

High Pressure Hydrogen Gas Diaphragm Compressor

April 2011 through April 2014

Single-stage high pressure reciprocating diaphragm compressor for pumping hydrogen gas meeting Class 1, Division II, Group B, C, D of the US NEC Code. The control enclosure is purged. has a closed loop water cooling system mounted on the same skid, auto-start,auto-unloding, pressure gauge, after-cooler, PSV protection.

Syngas for Biofuel application

April 2011 through April 2014

Two-stage reciprocating diaphragm compressor delivering syngas for a biofuels generation application from biomass feedstock.

Reciprocating Diaphragm Compressor for Hydrogen Gas for Middle East

November 2010 through November 2014

Two stage high pressure reciprocating diaphragm compressor for pumping hydrogen gas destined for the middle east. This hydrogen reciprocating compressor meets plant codes and standards. The scope of supply is a turnkey system including inlet and outlet pulsation dampners, pressure and temperature transmitters for all stages, segregated junction boxes, etc. Takes pressures from 26 bara to 201bara. Flow is 400 Nm3/hr.

Recycle Hydrocarbon Gas Diaphragm Compressor

November 2010 through November 2014

Single stage reciprocating diaphragm compressor for hydrocarbon gas mixture. Boosting pressures up to 500 psi (34 barg), flow rate 1,600 Nm3/hr and power is 60 hp(45 Kw). This compressor was installed in the Middle East and meets European codes and standards.

Reciprocating Diaphragm Compressor for Helium Gas Service

November 2010 through November 2013

Two-stage fully instrumented high pressure reciprocating diaphragm compressor for Helium gas service. Located in Brazil, this helium compressor boosts pressure from 1.5 bara to 251 bara. Flow rate is 97 Nm3/hr. Power is 56 Kw.

Diaphragm Compressor for Silane Service

November 2010 through November 2014

Duplex diaphragm compressor for silane service. Boosting pressure from 40 psia to 150 psia with a flow rate of 5 scfm. Scope of supply includes but not limited to suction and discharge ASME stamped accumulators, re-cycle flow valve, temperature and pressure transmitters, VCR fittings. The compressor is oxygen cleaned.

Diaphragm Compressor for Gas Blending

April 2010 through April 2012

Pdc's diaphragm compressor is located behind control panel and 6000 psig fill manifold.

Diaphragm Compressor for High Pressure Transfilling Helium Gas

April 2010 through April 2012

This diaphragm compressor is used for cascade filling of helium gas cylinders under high pressure. It also fills helium, argon,and nitrogen cylinders to 6000 psig and provides automatic, unattended top up of storage tubes.

High Pressure Hydrogen Diaphragm Compressors for Float Glass

June 2009 through June 2013

Two high pressure hydrogen diaphragm compressors mounted on a common skid for use in float glass operations in Turkey. Scope includes a local PLC Interfaced with master controls and two closed loop water cooling systems. The hydrogen compressor skid complies with European specifications.

Hydrogen Diaphragm Compressor for Biofuel Research

February 2009 through February 2013

Two-stage hydrogen gas diaphragm compressor 1200 psi discharge pressure, 50 hp. Moisture seperators with automatic drain. Pdc's compressor is used for research into biofuels. Our compressors are rated for Class 1, Div. II, Group B.

Diaphragm Compressors for Polysilicon Production

February 2009 through February 2014

(2) PDC-13-500/500-80% diaphragm compressors to recirculate carrier gas for high purity polysilicon production. Suction pressure 347 psi, discharge pressure 470 psi, Two polysilicon compressors systems with room for third to be added later, integrerated recirculation loop with heat exchanger, large suction accumulator tank and large discharge accumulator tank, dual filter housings with isolation valvesfor maintenance while operating, all located on a single skid 32 ft long x 11 ft wide and 12 ft high.

Recycling Syngas Diaphragm Compressors

January 2009 through January 2014

Two PDC-5-150-150 diaphragm compressors mounted on a common frame with controls. Pdc's compressors are CE/ATEX/PED compliant, winterization package, 110 gallon buffer tanks. 30" diameter heads

Diaphragm Compressor for Carbon Monoxide for Spain

December 2008 through December 2013

Pdc's carbon monoxide gas reciprocating diaphragm compressor is CE Marked, Category 3 (Zone 2), Single Stage Carbon Monoxide Diaphragm Compressor for Asturias, Spain. 29 BARG Discharge Pressure @ 40 NM3/HR Flow Rate. The Carbon monoxide compressor is heat Traced & Insulated Hydraulics for all-climate service. ATEX Certified Indicating Transmitters, Recycle Control Valve, Heat Tracing, & Skid Wiring. PED Certified Recycle Cooler. 100% Welded and Radiographed Process Piping & Vessels with Swagelok VCR Connections. ASME / PED Dual Certified Vessels.

Hydrogen Gas Diaphragm Compressor

July 2008 through July 2014

Fully instrumented high pressure hydrogen diaphragm compressor for high pressure hydrogen service, plus buffer tank inside a container destined for Russia.

High Pressure Hydrogen Diaphragm Compressor

January 2008 through January 2014

Single-stage high pressure hydrogen diaphragm compressor boosting pressure from 2000 psi to 5,000 psi. Fully instrumented rated for class 1, Div. II. 4 ASME coded storage cylinders are integrated into the skid.

Diaphragm Compressors for Air, Helium, Hydrogen, Helium, Carbon Monoxide Gases

January 2008 through October 2014

Pdc has supplied 6 single-stage high pressure PDC-3-6000 diaphragm compressors for nitrogen, air, hydrogen, helium, carbon monoxide gas compressors to a chemcial company in latin America. These compressors are completely instrumented and controlled by a PLC. Boosting pressures from 20 bar to 200 bar with a flow rate of 3 nm3/hr.

Diaphragm Compressors for high Purity Hydrogen Gas

January 2008 through January 2013

A manufacturer of high purity hydrogen generator contracted PDC to supply several hydrogen single-stage PDC-4-2500 compressors. Boosting pressure from 200 psi to 2300 psi with a flow rate of 12 Nm3/hr. These high pressure compressors are fully instrumented with inlet buffer, by-pass regulator, discharge flow control valve, PLC controls and winterization package.

Hydrogen Gas Diaphragm Compressor

February 2014

Front and back views of a PDC gas diaphragm compressor for hydrogen gas. This system has 175 hp, providing 400 Psi maximum suction pressure with 500 Psi discharge and 2000 SCFM flow rate.