A hydrogen fueling station for Air Liquide, Canada installed at Whistler, BC, Canada, featuring a Pdc diaphragm compressor used during the 2010 winter olymoics for bus filling.
Hydrogen refuelling station
April 2010 through April 2012
4 Pdc diaphragm hydrogen compressors used as part of the 2010 World Expo in Shanghai for refueling buses
Nuuk
April 2010 through April 2012
A Pdc diaphragm compressor has been integrated into the first hydrogen plant in Greenland.
Located in Nuuk, this facility can be retro-fitted for hydrogen fueling and is designed to be easily transported to another site if needed.
Yaeger airport; hydrogen compression
March 2010 through March 2012
The station uses water electrolysis to produce approximately 13 kg/day of hydrogen.
The Pdc hydrogen compressor is used to compress the hydrogen for storage. The station has 50 kg storage capacity at 6,000 psig and is used to dispense
to 5,000 psi (350 bar) vehicles.
Hydrogen Fueling Station for Fork Lifts
March 2010 through March 2013
Pdc diaphragm hydrogen compression system supplied to Linde for fork lift application at Wal-mart.
Sysco Canton Hydrogen Fueling Station
March 2010 through March 2013
Pdc diaphragm hydrogen compressor system supplied to Linde for fork lift application at Sysco Canton.
Converting sea water to hydrogen
April 2009 through April 2011
Used for a testing a concept. The project is to generate Hydrogen using a wind turbine and seawater. Presssure is boosted to 30 barg with PDC compressor. A commercial plant will be set up in the island of PNG using the results. Seawater that will be converted to Hydrogen. Drinking water will be made available to local public as a byproduct. Power and water will be available and a fuelcell fitted boat will be tested using the compressed Hydrogen.
Hydrogen Fueling Station
April 2009 through April 2011
Pdc packaged hydrogen refueling station for an OEM in California. A Pdc diaphragm hydrogen compressor was used.
Hydrogen Refueling packaged system
April 2009 through April 2011
Pdc packaged system for hydrogen refueling project in Albany New York.
SMUD-APCI, hydrogen fuel cell station
May 2008 through May 2010
BP SMUD station using solar energy to generate hydrogen used to fill vehicles. A Pdc diaphragm hydrogen compressor was part of the scope of supply.
Hydrogen Refueling Station for Fork Lifts
March 2008 through March 2010
PDC supplied diaphragm hydrogen compressor to Air Liquide as part of their fueling station in Oshawa for a forklift application project.
Hydrogen Refueling Station for Fork Lift-
March 2008 through April 2010
Linde uses a PDC diaphragm hydrogen compressor for it's hydrogen fork lift application.
Shanghai hydrogen Fueling Station
February 2008 through April 2011
BOC/Linde, in collaboration with Tongji University & Shell, uses PDC hydrogen compressors in the construction of the first hydrogen fueling station in Shanghai
Beijing, China Hydrogen Fueling Station
January 2008 through July 2010
Air Products designed and engineered a hydrogen fuelling station in Beijing, China. A Pdc hydrogen compressor was used as part of the station. See article in News.
High pressure hydrogen compressor for fuel cells
January 2008 through January 2010
Pdc supplied a diaphragm hydrogen compressor for 1400 bar for ET Technolgie GmBH, Germany for high-pressure testing for storage of gaseous hydrogen to improve cruising range of hydrogen operated cars.
Sapio hydrogen Fueling Station
January 2008 through January 2010
APCI has installed a hydrogen fueling station in Matova, Italy utilizing a PDC supplied Series 200 compression skid. A Pdc hydrogen compressor was part fo the station.
Madrid Hydrogen Fuelling Station
October 2001 through February 2010
PDC offers a Pdc hydrogen compressor featuring up to 3000 Psi (21 MPa) suction and 6000 Psi (41 MPa) discharge pressures with a flow rate 74,640 SCFH (2000 Nm3 /hr). This compressor can fill a typical alternate fuel bus in approximately 10 minutes.
