Stirred glass reactors from PDC are ideal for visual observation of chemical reactions under pressure. Each glass reactor is a complete system including the glass vessel, supporting stand, agitation assembly (magnetic stirrer, drive motor, belt, belt guard and impeller), multiple process connection ports, drain port, sample tube, temperature sensor and a rupture disc assembly along with an agitation control panel to adjust and monitor the speed of the stirrer.
Continuously Stirred Tank Reactors in a Variety of Sizes
We offer a wide variety of glass continuously stirred tank reactors to meet most mixing, stirring or blending requirements. Please refer to the following selection chart for specific details:
| Capacity | ||||||
| 1/2 liter | 1 liter | 2 liters | 3 liters | 4 liters | 5 liters | |
| Vessel Interior Diameter | 3.2 in. (8.1 cm) |
3.2 in. (8.1 cm) |
3.2 in. (8.1 cm) |
6 in. (15.2 cm) |
6 in. (15.2 cm) |
6 in. (15.2 cm) |
| Vessel Length | 4.2 in. (10.7 cm) |
8.9 in. (22.6 cm) |
14.9 in. (37.8 cm) |
7 in. (17.8 cm) |
8.5 in. (21.6 cm) |
11 in. (27.9 cm) |
| Maximum Design Pressure | 174 psig (12 bar) | 29 psig (2 bar) | ||||
| Maximum Design Temperature | 391oF (200oC) | 212oF (100oC) | ||||
| Jacketed | Yes | No | ||||
| Drain Size | 1/4-18 NPT | 1/2-14 NPT | ||||
| Number of Ports | Total of 8 ports. (Note: Three of the eight ports are reserved for rupture disc, thermocouple, and sampling tube.) |
|||||
| Size of Ports | 1/8-27 NPT | |||||
| Sampling Tube | Yes | |||||
| Temperature Sensor | Yes | |||||
| Rupture Disc | Yes | |||||
| Seals | Teflon | |||||
| Magnetic Drive Torque | 16 in. lbs. (181 Ncm) | |||||
| (4) Flat Blade Impeller: | Yes | |||||
| Impeller Speed | 0-1700 rpm | |||||
| DC Motor | 1/2 Hp | |||||
| Electrical Requirements | 220/110 VAC Single phase | |||||
Floor Mounted |
Yes | |||||
| Digital Tachometer & Speed Control | Yes | |||||
| Upper, Lower Head & Impeller | Stainless Steel | |||||
