Click here to return to PDC's home page

Reactor and Pressure Vessel Selection Guide

Please use the form below to help you select the equipment, design features, and options for which you would like a quotation. If you'd like information but aren't interested in a price quote at this time, please send an email to info@pdcmachines.com.

Vessel capacity
Vessel dimensions No preference, use PDC's standard dimensions

Vessel dimension requirement (specify dimensions)

inside diameter

straight side length

Materials of vessel construction

Stainless steel

 Carbon steel

 Monel

 Hastalloy C

 Hastalloy B

 Inconel

 Titanium

Other (specify):

Interior surface finish Mill finish (standard)

Other (specify):

Top Can open

Welded to vessel

Process connections
Size Quantity
0.25 inch
0.5 inch
0.75 inch
1.0 inch
1.5 inch
2.0 inch
2.5 inch
3.0 inch
4.0 inch
Maximum working pressure
Temperature range to degrees
Agitator

  Magnetic drive

  Mechanical drive

  Packed drive

  Not required

Speed control

  Fixed speed

  Variable speed (specify rpm range)

  Not required 

Agitator drive torque

  6 in. lb. / 68 Ncm

  16 in. lb. / 181 Ncm

  60 in. lb. / 679 Ncm

  160 in. lb. / 18 Nm  

  300 in. lb / 33.9 Nm

  1,000 in. lb. / 113 Nm

  2,000 in. lb. / 226 Nm

  Other (specify)

  Unknown

  Not required

Material specifications
Viscocity: cP
Specific Gravity:
Consistency: 
Agitator drive motor

  AC

  DC

  Air

  Unknown

  Not required

Power supply   115 volt 50/60 Hz

  230 volt 50/60 Hz

  Not required

Impeller

  Flat blade

  Pitched blade

  Helical ribbon, single

  Helical ribbon, double

  Anchor

  Gas dispersion

  Catalyst basket  

  Other (specify)

  Not required

Internal cooling coil   Yes

  No
Temperature control systems

  Heat / Cool Outputs

  PID Controller

  Programmable ramp & soak

  Remote control  

  Not required

Note: High temperature protection is provided as standard
Control options

  Pressure display

  Cool solenoid valve assembly

  Data acquisition 

  Not required

Bottom drain valve

  Ball valve

  Flush valve

  Port only

  Not required
Heating system   Electrical mantle

  Jacketed only 

  Jacketed with hot oil system

  Not required

Jacket specifications

Please complete this section if you selected Jacketed only or Jacketed with hot oil system above.

Jacket materials of construction:

Stainless steel

 Carbon steel

 Monel

 Hastalloy C

 Hastalloy B

 Inconel

 Titanium

Other (specify):  

Not required

Maximum working pressure:
Temperature range: to degrees
Jacketed area:

Side shell

Bottom

Both

Not required

Electrical classification

  Non-Hazardous

  Hazardous (specify classification below)

Hazardous area classification as interpreted by NEC, Article 500:
Class, Division, Group

  Hazardous, but do not know electrical classification 
Custom options
Pressure gauge: Yes No
Temperature sensor: Yes No
Sampling tube: Yes No
Sight Glass: Yes No
Teflon Lining: Yes No
Reflux Condenser: Yes No
Weight Control: Yes No
Level Control: Yes No
Torque Measuring Devices: Yes No
Winch: Yes No
30o Tilt: Yes No
Baffles: Yes No
Other (specify):
Contact Information
Your name *
Company *
Address
Telephone Number
Fax Number
E-mail Address *
Comments

* You must provide this information in order for us to respond to your request.

 


PDC Machines, Inc.
1875 Stout Drive, Warminster PA 18974 USA
Voice: 215-443-9442 - Fax: 215-443-8530 - E-mail: info@pdcmachines.com

Home | Overview | Pilot Plants | Metal Reactors | Glass Reactors | Pressure Vessels | Magnetic Stirrers | Syringe Pumps | Diaphragm Compressors | Engineering Services

Copyright © Pressure Dynamic Consultants, 2000-2001.